Show us the unit
Send photos, the location and the details you already know. Include a contact who can discuss ownership and the equipment's availability.

West Virginia's transformer buying service
Turn surplus electrical equipment into a cash offer. Send the nameplate—we'll review the unit, pay upfront and cover the freight.
A direct approach to surplus equipment
We cover all freight for a purchase under the agreed transaction. Explain the unit's location, approximate dimensions and weight if known, access restrictions and the expected availability date.
Freight is separate from site disconnection, rigging and preparation. Discuss what the site can provide and what each party is responsible for before a truck is scheduled.
Your first message can be brief: identify the equipment, provide the nameplate if safely accessible, say where it is located and tell us when it may become available. Include several numbered items if a project has more than one transformer.
Every offer depends on the actual equipment and agreed terms. We buy rather than act as an equipment supplier; manufacturer names on this site identify equipment and do not imply an affiliation or endorsement.
When a West Virginia owner has several surplus transformers, freight planning starts with understanding what is actually available, not treating every unit as interchangeable. This business buys transformers; it does not sell transformers. A seller can describe the units together while identifying each one separately, so a buyer can compare the inventory and consider which units may be of interest. A cash offer is based on the information available about the particular equipment and transaction, rather than on a general assumption about a whole lot.
Nameplate capacity describes a rated electrical characteristic; it does not establish a transformer’s guaranteed resale value, condition, marketability, or suitability for another use. Even units with the same stated capacity may differ in voltage markings, configuration, age, condition, completeness, or other identifying details. Conversely, a different capacity alone does not say which unit is worth more. Comparing existing nameplate information and known condition helps make an inventory discussion more specific without treating a rating as a promise of value.
If available, share existing nameplate details for each unit, such as the manufacturer identification, model or serial information, capacity, and voltage markings. These details help distinguish one transformer from another and support a more useful comparison; they do not need to be interpreted as proof of resale value or an exact application. Outside photos may also help show the equipment’s general appearance and how it is situated, but provide them only if they are safely available. No seller testing is required to begin a discussion.
Condition information can include what is already known about completeness, visible damage, prior storage, or other relevant history. Mention known access constraints, such as limited space, scheduling considerations, or whether the equipment is part of a larger surplus inventory. These are planning details, not a request for the seller to inspect, open, or move a transformer. Not every record is mandatory: useful information varies by unit and situation, and unknown details can simply be identified as unknown rather than guessed.
For transactions that proceed, freight is covered. Freight arrangements concern transport and should be discussed in relation to the units, their location, and the available access information. Coverage of freight does not by itself settle every responsibility at the site. In particular, the scope and responsibility for electrical isolation and site rigging are agreed separately from covered freight, including who is responsible for arranging those tasks and any associated costs.
Electrical work and safety-related work must be handled by qualified personnel. The seller is not expected to perform electrical work or undertake hazardous preparation to make a pickup possible. Do not treat a freight discussion as authorization or instructions to disconnect, open, test, drain, lift, or move equipment. Instead, describe known site constraints and contacts who can discuss access and responsibilities. Clarifying those boundaries before scheduling helps avoid confusing transport coverage with electrical or rigging services.
This business buys all voltage classes, so voltage class alone does not rule out a discussion. Existing markings still matter when comparing units, but they do not guarantee acceptance, a particular offer, or suitability for another application. Share the seller’s ownership authority or the appropriate contact for confirming it, along with the best seller contact for inventory and pickup questions. A clear contact path can help resolve missing details without making every document a prerequisite.
The business makes cash offers and provides payments upfront, with payment terms and pickup arrangements discussed for the specific transaction. A seller can ask what information is still needed, which units are being considered, and how freight, electrical isolation, and site rigging responsibilities are defined before agreeing to proceed. There is no need to arrange seller testing to support the conversation. When comparing multiple transformers, keep each unit’s identifying details and known condition distinct so freight planning and the offer discussion reflect the actual inventory.
Start with the manufacturer's name and the rating plate if you can photograph them safely. The plate may show the kVA or MVA, primary and secondary voltages, phase, model and serial number. A broad photo of the exterior helps us understand the enclosure, tank, mounting and visible accessories. If the plate is missing or unreadable, say so and send the information already available rather than guessing.
For more than one unit, use a separate number for each transformer and its photos. Include the pickup location, whether it is still connected, and the date when the authorized owner expects it to be released. You can also describe known damage, missing parts or existing documentation. These details let the buyer evaluate the actual asset instead of treating unlike equipment as interchangeable.
Practical details
There is no single universal price for Transformer Freight and Pickup. The manufacturer, type, rating, age if known, observed condition, documentation, accessories and practical collection requirements may all affect an offer. A single photograph or a capacity number is not a promise of a particular value. We will review what you provide and discuss the offer and any relevant transaction terms directly with you.
If you accept an offer and the parties agree on the transaction details, payment is made upfront before freight pickup. The payment method and the scope of the purchase should be confirmed in that agreement. A list of included units and accessories helps everyone distinguish the purchased equipment from items that are not being transferred.
We cover all freight for an agreed purchase. Tell us the actual collection point, known dimensions and weight, whether the equipment is indoors or outside, and any gate, road, door or scheduling restrictions. If the weight is unknown, do not guess; send the plate and photographs and let the parties discuss what information is needed for a safe transport plan.
Freight is not the same as electrical disconnection, rigging or preparing a transformer at the site. Confirm who will handle those tasks, where the unit will be staged and what access the carrier will have. Qualified people must perform electrical work, and any environmental, utility or property requirements still apply. The point is to agree on responsibilities before a truck is sent, not to assume that every site is identical.
You do not have to arrange or pay for testing to start our review. Existing records, photos and a straightforward account of what is known are welcome; if information is unavailable, please say so. No request for a photo requires opening a locked cabinet, touching a transformer or approaching energized equipment. Take pictures only from a safe and authorized position.
The organization using a site may not own every transformer on it. Equipment can be owned by a utility, tenant, landlord, contractor or another party. Before accepting an offer, establish who has authority to sell the specific unit and whether it is subject to another agreement. Share a realistic release date, especially when a changeout or closure is being completed in phases.
For questions about a transformer in West Virginia, call or text us with the nameplate or use the form below. We review one unit and multi-unit lists alike. Offer timing and details depend on the information and transaction; there is no claim of a fixed market price or guaranteed acceptance for every item.
The selling process
Send photos, the location and the details you already know. Include a contact who can discuss ownership and the equipment's availability.
We discuss an equipment-specific cash offer and agree on what is included, payment and the practical requirements for the transaction.
Payment is upfront before pickup, and we cover all freight. The parties coordinate safe release, site access and handling responsibilities.
Whether the asset is a small control transformer or a larger substation unit, useful records are the ones that accurately identify the specific equipment. A complete nameplate, an honest condition description and a clear release plan give the conversation a better starting point than an assumed model or an unsupported condition claim. Electrical isolation, protection, removal and related site work must always be handled by qualified professionals under applicable requirements.
Frequently asked questions
No. We do not require the seller to arrange testing for an inquiry. Please share any existing information and the condition you can observe safely; do not touch or open energized equipment to collect it.
We cover all freight for an agreed purchase. The parties discuss the pickup point, access, preparation and any site-handling responsibilities before collection is scheduled.
After a cash offer and the transaction terms are agreed, payment is upfront before freight pickup. The payment method and the equipment included should be confirmed in the agreement.
Yes. Send a separate plate and exterior photo for each unit when possible, along with locations and known details. We review many manufacturers and all voltage classes; an actual offer depends on the equipment and agreed terms.
Tell us what you have
Send the details you know. No seller testing is required. Payment is upfront after the offer is agreed, and we cover all freight.
Call (614) 715-3047 or email saleselectricalbuyers@gmail.com.
Text Nameplate Photos