Show us the unit
Send photos, the location and the details you already know. Include a contact who can discuss ownership and the equipment's availability.

West Virginia's transformer buying service
Turn surplus electrical equipment into a cash offer. Send the nameplate—we'll review the unit, pay upfront and cover the freight.
A direct approach to surplus equipment
We buy transformers across all voltage classes, including units described by 13.2 kV primary voltage. Send the information you already have for an equipment-specific cash-offer review; there is no need for the seller to arrange electrical testing.
The 13.2 kV figure is presented as a primary-side search term. A full plate may also show a secondary voltage, taps, phase and different connection information; include the complete image rather than extrapolating from one number.
A voltage shown on one winding does not establish the other winding or prove that the equipment matches a future system. Photograph all visible ratings and note any taps, missing labels or documents without making assumptions about suitability.
For safe pickup planning, also describe the transformer type, mounting, physical location and release status. Qualified personnel must handle isolation and disconnection, and any applicable utility and site requirements remain in force.
A 13.2 kV primary-voltage marking is an important starting point when you are selling a transformer, but it does not by itself describe the complete unit or establish its application. Other nameplate information can distinguish one transformer from another, including manufacturer, model or serial number, kVA rating, secondary voltage, phase, frequency, impedance, and connection details when shown. Share only information you already have; the buyer can review it alongside the rest of the available description rather than asking you to determine suitability.
For a multi-unit inventory, create a simple identifier for each transformer and use that same identifier on its records, photographs, and stated pickup location. For example, a hypothetical seller might call units “A,” “B,” and “C,” then note which existing nameplate image and outside photographs correspond to each. This helps prevent a 13.2 kV primary marking from being mistakenly associated with a different unit’s capacity, condition, or location. A spreadsheet or short written cross-reference is useful, but no special format is required.
Existing nameplate details and outside photos, if safely available, help describe the equipment without requiring you to inspect it closely or handle it. Include the identifier visible in each image, where practical, so the buyer can match the photograph to the correct transformer. You may also share available records, such as prior inventory descriptions or maintenance documents, but missing paperwork does not mean you should create measurements or conclusions. The buyer purchases transformers and does not sell transformers.
Describe known condition in plain terms, distinguishing what you have observed from what is recorded or unknown. You can mention whether the unit is represented as stored, installed, or removed, and report visible concerns or known history if available; do not open, test, or otherwise examine equipment to answer questions. There is no seller testing requirement: the process involves no seller testing. Qualified personnel must handle electrical work and safety, and you need not perform dangerous steps or arrange testing for an offer.
For each unit, identify the organization or person with authority to sell it, and provide a seller contact who can answer questions about that specific transformer. If several people manage the inventory, clarify who can confirm ownership authority and coordinate information. The buyer may ask for a connection between the unit identifier and its pickup location, especially when equipment is stored at more than one site. Share known access constraints, such as scheduling limits or restricted vehicle access, rather than assuming all units can be collected under identical conditions.
Pickup planning is separate from the technical description. State what is known about the unit’s present setting and any access limits, without attempting to move it or prepare it for collection. The scope and responsibility for electrical isolation and site rigging are agreed separately from covered freight; neither the tasks nor their cost are automatically included in freight coverage. Qualified personnel must handle electrical isolation and safety, and site rigging arrangements should be clarified for the particular unit and location.
Once the buyer has reviewed the information, the offer can be discussed with the correct transformer and pickup point in view. This business makes a cash offer, provides payments upfront, and freight is covered. Confirm how the proposed transaction applies to each identified unit and how freight coordination relates to the separately agreed site responsibilities. Covered freight does not mean electrical isolation or rigging is automatically performed or paid for by the buyer.
The business buys all voltage classes, including transformers with a 13.2 kV primary voltage, and evaluates available information rather than treating that marking as a complete specification. If a nameplate is incomplete, a photograph is unavailable, or a location detail is uncertain, explain what is missing and provide what you can safely access. A clear unit-by-unit account supports a more informed conversation while leaving electrical work, safety decisions, and any site-specific rigging arrangements to qualified personnel and the parties’ agreed scope.
Start with the manufacturer's name and the rating plate if you can photograph them safely. The plate may show the kVA or MVA, primary and secondary voltages, phase, model and serial number. A broad photo of the exterior helps us understand the enclosure, tank, mounting and visible accessories. If the plate is missing or unreadable, say so and send the information already available rather than guessing.
For more than one unit, use a separate number for each transformer and its photos. Include the pickup location, whether it is still connected, and the date when the authorized owner expects it to be released. You can also describe known damage, missing parts or existing documentation. These details let the buyer evaluate the actual asset instead of treating unlike equipment as interchangeable.
Practical details
There is no single universal price for 13.2 kV primary voltage. The manufacturer, type, rating, age if known, observed condition, documentation, accessories and practical collection requirements may all affect an offer. A single photograph or a capacity number is not a promise of a particular value. We will review what you provide and discuss the offer and any relevant transaction terms directly with you.
If you accept an offer and the parties agree on the transaction details, payment is made upfront before freight pickup. The payment method and the scope of the purchase should be confirmed in that agreement. A list of included units and accessories helps everyone distinguish the purchased equipment from items that are not being transferred.
We cover all freight for an agreed purchase. Tell us the actual collection point, known dimensions and weight, whether the equipment is indoors or outside, and any gate, road, door or scheduling restrictions. If the weight is unknown, do not guess; send the plate and photographs and let the parties discuss what information is needed for a safe transport plan.
Freight is not the same as electrical disconnection, rigging or preparing a transformer at the site. Confirm who will handle those tasks, where the unit will be staged and what access the carrier will have. Qualified people must perform electrical work, and any environmental, utility or property requirements still apply. The point is to agree on responsibilities before a truck is sent, not to assume that every site is identical.
You do not have to arrange or pay for testing to start our review. Existing records, photos and a straightforward account of what is known are welcome; if information is unavailable, please say so. No request for a photo requires opening a locked cabinet, touching a transformer or approaching energized equipment. Take pictures only from a safe and authorized position.
The organization using a site may not own every transformer on it. Equipment can be owned by a utility, tenant, landlord, contractor or another party. Before accepting an offer, establish who has authority to sell the specific unit and whether it is subject to another agreement. Share a realistic release date, especially when a changeout or closure is being completed in phases.
For questions about a transformer in West Virginia, call or text us with the nameplate or use the form below. We review one unit and multi-unit lists alike. Offer timing and details depend on the information and transaction; there is no claim of a fixed market price or guaranteed acceptance for every item.
The selling process
Send photos, the location and the details you already know. Include a contact who can discuss ownership and the equipment's availability.
We discuss an equipment-specific cash offer and agree on what is included, payment and the practical requirements for the transaction.
Payment is upfront before pickup, and we cover all freight. The parties coordinate safe release, site access and handling responsibilities.
Whether the asset is a small control transformer or a larger substation unit, useful records are the ones that accurately identify the specific equipment. A complete nameplate, an honest condition description and a clear release plan give the conversation a better starting point than an assumed model or an unsupported condition claim. Electrical isolation, protection, removal and related site work must always be handled by qualified professionals under applicable requirements.
Frequently asked questions
No. We do not require the seller to arrange testing for an inquiry. Please share any existing information and the condition you can observe safely; do not touch or open energized equipment to collect it.
We cover all freight for an agreed purchase. The parties discuss the pickup point, access, preparation and any site-handling responsibilities before collection is scheduled.
After a cash offer and the transaction terms are agreed, payment is upfront before freight pickup. The payment method and the equipment included should be confirmed in the agreement.
Yes. Send a separate plate and exterior photo for each unit when possible, along with locations and known details. We review many manufacturers and all voltage classes; an actual offer depends on the equipment and agreed terms.
Tell us what you have
Send the details you know. No seller testing is required. Payment is upfront after the offer is agreed, and we cover all freight.
Call (614) 715-3047 or email saleselectricalbuyers@gmail.com.
Text Nameplate Photos